Solved–Programming Languages and Paradigms Assignment 4– Solution

Description

There are 4 questions to be solved on the LearnOCaml system. The assignment is due at 3pm.

Extensions are not possible for any reason.

[Question 1: 23 points] In this question we work with polymorphic trees

type ’a tree = Empty | Node of ’a tree * ’a * ’a tree;;

Write a function mapTree that takes a function and a tree and applies the function to every node of the tree. Here is the type

val mapTree : (’a -> ’b) * ’a tree -> ’b tree =

Here is an example

# let t1 = Node(Empty, 0, (Node(Empty, 1, Empty)));; let t2 = Node(Node(Empty,5,Empty),6,Empty);;

let t3 = Node(Node(t2,2,Node(Empty,3,Empty)),4,t1);;

# t3;;

– : int tree = Node

(Node (Node (Node (Empty, 5, Empty), 6, Empty), 2, Node (Empty, 3, Empty)), 4, Node (Empty, 0, Node (Empty, 1, Empty)))

# mapTree((fun n -> n + 1), t3);;

– : int tree =

Node

(Node (Node (Node (Empty, 6, Empty), 7, Empty), 3, Node (Empty, 4, Empty)), 5, Node (Empty, 1, Node (Empty, 2, Empty)))

[Question 2: 34 points] Suppose that f : R ! R is a continuous function from the real numbers to the real numbers. Suppose further that there is an interval [a; b] in which the function is known to have exactly one root1. We will assume that 2 f(a) < 0 and f(b) > 0 and the root r is somewhere in between. There is an algorithm that is reminiscent of binary search that nds (a

1The root of a function f is a value r such that f(r) = 0.
2When I am writing mathematical statements I do not bother to write 0:0; when I am writing code I am careful
to distinguish between 0 and 0:0.

1

good approximation of) the root. The half-interval method for nding the root of a real-valued function works as follows. The idea is to search for the root by rst guessing that the root is the midpoint of the interval. If the midpoint is the root we are done. If not, we check whether the value of f at the midpoint is positive or negative. If it is positive then the root must be between a and the midpoint; if it is negative, the root must be between the midpoint and b. In either case we recursively call the search algorithm. Code this algorithm in OCaml. The following shows the names and types that we expect.

# let rec halfint((f: float -> float), (posValue:float),(negValue:float),(epsilon:float)) = ….

val halfint : (float -> float) * float * float * float -> float =

The parameter epsilon is used to determine the accuracy with which you are making comparisons.

Recall that you cannot reliably test oating-point numbers for equality. You may need to use

Float.abs which is the oating point version of the absolute value function.

[Question 3: 33 points] This is a classic example of a higher-order function in action. Newton’s method can be used to generate approximate solutions to the equation f(x) = 0 where f is a di erentiable real-valued function of the real variable x. The idea can be summarized as follows:

Suppose that x0 is some point which we suspect is near a solution. We can form the linear approximation l at x0 and solve the linear equation for a new approximate solution. Let x1 be the solution to the linear approximation l(x) = f(x0) + f0 (x0)(x x0) = 0. In other words,
f(x0) + f0 (x0)(x1 x0) = 0
x1 x0 = f(x0)
f0 (x0)

x1 = x0 f(x0)
f0 (x0)

If our rst guess x0 was a good one, then the approximate solution x1 should be an even better approximation to the solution of f(x) = 0. Once we have x1, we can repeat the process to obtain x2, etc. In fact, we can repeat this process inde nitely: if, after n steps, we have an approximate solution xn, then the next step is
f(xn)
xn+1 = xn f0 (xn):

This will produce approximate solutions to any degree of accuracy provided we have started with a good guess x0. If we have reached a value xn such that jf(xn)j < “, where ” is some real number representing the tolerance, we will stop.

Implement a function called newton with the type shown below. The code outline is for your guidance.

# let rec newton(f, (guess:float), (epsilon:float), (dx:float)) =

let close((x:float), (y:float), (epsilon:float)) = abs_float(x-.y) < epsilon in let improve((guess:float),f,(dx:float)) = …. in if close((f guess), 0.0, epsilon) then 2 guess else …. val newton : (float -> float) * float * float * float -> float =

which when given a function f, a guess x0, a tolerance ” and an interval dx, will compute a value x0 such that jf(x0 )j < “. You can test this on built-in real-valued functions like sin or other functions in the mathematics library. Please note that this method does not always work: one needs stronger conditions on f to guarantee convergence of the approximation scheme. Never test it on tan! Here are two examples: let make_cubic((a:float),(b:float),(c:float)) = fun x -> (x*.x*.x +. a *. x*.x +. b*.x +. c)

let test1 = newton(make_cubic(2.0,-3.0,1.0),0.0,0.0001,0.0001)

(* Should get -3.079599812; don’t worry if your last couple of digits are off. *)

let test2 = newton(sin,5.0,0.0001,0.0001)

(* Should get 9.42477…. *)

[Question 4: 10 points] In class we say how to de ne a higher-order function that computes de nite integrals of the form
Z a
f (x)dx:
b

To remind you

let integral((f: float -> float),(lo:float),(hi:float),(dx:float)) = let delta (x:float) = x +. dx in

dx *. iterSum(f,(lo +. (dx/.2.0)), hi, delta);;

where iterSum was also de ned in class. In this question I want you to de ne a function that computes the inde nite integral:
Z x
indIntegral(f) = f(y)dy:
0

This means that it returns a function not a number. Here is the type that I expect

# let indIntegral(f,(dx:float)) = …

val indIntegral : (float -> float) * float -> float -> float =

Use any of the functions de ned in class. We will preload iterSum and integral so you won’t have to recode them. You do not have to do test cases for the last question.

3